Enquire
+44 (0)1753 549 360
Home
You are here : Restoration : Wheel Components : Vintage Centres
Wheel Components
Classic Centres
Vintage Centres
Rolled-edge Rims
Razor-edge Rims
Beaded-Edge, Two-piece & Bibendum Rims
Spokes and Nipples
Restoration Diaries

MWS Centres

Vintage splined centres

MWS splined centres are forged using modern techniques to produce a very strong and durable product. When a component is forged the metal is compacted resulting in improved strength characteristics when compared to cast, pressed or machined parts. The Alvis Jelly Mould centre is produced using a multi-stage forming process incorporating heat treatments to provide the required strength.

Centre sizes are defined by the maximum size of the outer bearing (in mm) which can be used with the hub and do not relate directly to a measurement on the centre itself. Please see the table at the bottom of this page for more information.

Please note: Other vintage centres are available - contact us for details
 
Click here to go to the Vintage Centres section of our Shop
 
Part Number Description
Vintage Splined Centres
WSSI-32/2PC-UND 32mm Two-piece Plain Carbon Steel Centre - Undrilled
WSSTABMDRILLED MG TA Carbon Steel Centre - 48 Spoke
WSSTACD MG TA Chrome Centre - 48 Spoke
WSSTCBM MG TC Carbon Steel Centre - Undrilled
WSSTCBMDRILLED MG TC Carbon Steel Centre - 48 Spoke
WSSTCCD MG TC Chrome Centre - 48 Spoke
 
WSSI-42/1PLN-60S 42mm One-piece Plain Carbon Steel Centre - 60 Spoke
WSSI-42/1PLN-70S 42mm One-piece Plain Carbon Steel Centre - 70 Spoke
WSSI-42/1PLN-UND 42mm One-piece Plain Carbon Steel Centre - Undrilled
WSSI-42/1RIB-60S 42mm One-piece Ribbed Carbon Steel Centre - 60 Spoke
WSSI-42/1RIB-UND 42mm One-piece Ribbed Carbon Steel Centre - Undrilled
WSSI-42/2PC-70S 42mm Two-piece Plain Carbon Steel Centre - 70 Spoke
WSSI-42/2PC-UND 42mm Two-piece Plain Carbon Steel Centre - Undrilled
 
WSSI-52/1PLN-60S 52mm One-piece Plain Carbon Steel Centre - 60 Spoke
WSSI-52/1PLN-70S 52mm One-piece Plain Carbon Steel Centre - 70 Spoke
WSSI-52/1PLN-72S 52mm One-piece Plain Carbon Steel Centre - 72 Spoke
WSSI-52/1PLN-UND 52mm One-piece Plain Carbon Steel Centre - Undrilled
WSSI-52/1RIB-54S 52mm One-piece Ribbed Carbon Steel Centre - 54 Spoke
WSSI-52/1RIB-UND 52mm One-piece Ribbed Carbon Steel Centre - Undrilled
WSSI-52/2PC-UND 52mm Two-piece Plain Carbon Steel Centre - Undrilled
WSSI-52/2PC-135 52mm Two-piece Plain Carbon Steel Centre - 135mm
 
WSSI-62/2PC70SPK 62mm Two-piece Plain Carbon Steel Centre - 70 Spoke
WSSI-62/2PC-UND 62mm Two-piece Plain Carbon Steel Centre - Undrilled
 
WSSI-72/1PLN-70S 72mm One-piece Plain Carbon Steel Centre - 70 Spoke
WSSI-72/1PLN-UND 72mm One-piece Plain Carbon Steel Centre - Undrilled
 
WSSN802PBENTLEY 80mm Two-piece Bentley Carbon Steel Centre - Undrilled
 
WSSI-JELLYMOULD Alvis Jelly Mould Centre - Undrilled
WSSI-JELMOULD-A Alvis Jelly Mould Centre - Drilled for Inner & Outer Lacing
WSSI-JELMOULD-B Alvis Jelly Mould Centre - Drilled for Two Line Lacing

The table below is an abbreviated version - the full table can be found here

Wheel Type
Note 1
Actual Hub Diameter
Note 2
42 62.5 mm
52 73 mm
62 82.5 mm
72 92 mm
80 102 mm

Note 1:  The wheel type designation refers to the maximum size of outer bearing, in millimetres, which can be used with the hub.
 
Note 2:  Actual hub diameter is measured across the outside of the splines of the hub on the car, not the wheel centre. Dimensions are ±½mm.
























UK Sales: 01753 549 360
UK Fax: 01753 547 170
  • Italian
  • German
  • french
  • spanish
Export Sales: +44 (0) 1753 598 382
Motor Wheel Service International Ltd, Units 1-4 Elder Way, Waterside Drive, Langley, Slough, Berkshire, SL3 6EP, UK
Sitemap | Webmaster | Contact Us | Terms and Conditions | Powered by vcGenius